OK friends and neighbors, here are the basic components in the mount for the Bendix/King AV80R GPS. The aluminum is the overlay that fits just below the transponder. Right above it is the holder for the GPS provided in the box. To the right are the fasterners, a 6-32 x 1/2" screw, a #6 washer, a #6 lockwasher, another #6 washer and a #6 nut.
The screw goes through the slot in the holder with a washer behind it to spread out the forces. The slot is exactly the width of a #6 screw, so I had to take a small file and widen the slot just a smidgen.
This is the back side. Washer, lock washer, nut. Nothin' to it!
And here is the trial fit. I think it is going to be pretty snazzy, once the panels are all painted a dark gray and everything is back together.
OK friends and neighbors, here are the basic components in the mount for the Bendix/King AV80R GPS. The aluminum is the overlay that fits just below the transponder. Right above it is the holder for the GPS provided in the box. To the right are the fasterners, a 6-32 x 1/2" screw, a #6 washer, a #6 lockwasher, another #6 washer and a #6 nut.
The screw goes through the slot in the holder with a washer behind it to spread out the forces. The slot is exactly the width of a #6 screw, so I had to take a small file and widen the slot just a smidgen.
This is the back side. Washer, lock washer, nut. Nothin' to it!
And here is the trial fit. I think it is going to be pretty snazzy, once the panels are all painted a dark gray and everything is back together.
No comments:
Post a Comment